Zhejiang Anji Tianyang Rotational Mouding Machinery Co.,Ltd

High quality product, professional service, being the core supplier in laser industry!

Home > News > Content
Rotomolding Machine On Request
- Jul 20, 2017 -

Rotomolding Machine On request

1, the equipment in the use of the process, the limitations are relatively small, has a strong ability to adapt to the production of a variety of different types of products (completely closed, not completely closed products, large, very large products, etc.);

   2, in the production of products produced in the molding process, not easy to deformation, product edge forming integrity, no seams in the production due to rolling reasons, you can make the product outside the wall to maintain a consistent thickness, and can be based on production needs, Good control of the wall thickness adjustment;

   3, can be produced according to the requirements, many heterosexual products to meet the requirements;

   4, in the production process, to good savings in raw materials, there is no flow, gates and other waste waste. In the production of high utilization of materials, can play a very good conservation, efficient completion of production.

 Molding machine suitable for high temperature environment in a variety of bearings, gears and other transmission machinery parts of the lubrication; for metallurgy, mining, oil, machinery, transportation and other industries in high temperature, heavy load, wet and other bad conditions, , Gear lubrication; especially for high temperature bearings, such as: large-scale chemical plant auxiliary boiler rotary fire Tsui bearings, plastic extruder sleeve bearings, cracking furnace fan, regenerative compressor and other high-temperature bearings, Machine, hot melt blower, heat setting drying room, baking machine, high temperature dyeing tank and other high temperature work at a higher speed of various mechanical rolling bearings and sliding bearing lubrication.

The basic function of rotomolding equipment

1, can be rotated in two mutually perpendicular direction of the mold, so that the material in the mold under the action of gravity can reach any part of the cavity; in addition to the two-way rotation of the rotary press, there is a special rotomolding products Rocking machine. The rotomoulding machine mounts the mold on a rotatable frame which can be tilted to the left and right so that the mold holder 45 is tilted and the mold is rotated and shaken at the same time as the material in the mold reaches any of the cavities under gravity Parts.

   2, can heat the mold to a given temperature, so that the material within the mold fully melted.

   3, according to the need to cool the mold, so that has been molded good parts cooling stereotypes, in addition to the equipment should also be easy to operate, easy loading and unloading mold, easy loading, stripping.

 Rotating water tank is a tool for storing water. When using a rotomered tank, you should consider the safety problem from a safe point of view. Whether it is the safety of the rotomolding tank or the safety of the stored material inside the tank, Must pay attention to. Xiaobian below to introduce the use of rotomolding tank precautions.

  1, in the choice of rotomolding tank should be selected when the regular production of qualified products manufacturers, and should not seek a small cheap to choose some poor water tanks and suffer losses. This example is endless in our country, so it is very important to choose the right product.

  2, the use of rotomolding tank is used to do, this is before the purchase need to think clearly, buy what kind of rotomolding tank to meet our needs, after a good choice to choose the right water tank.

  3, pay attention to the protection of the rotomolding tank, in the usual use of time to pay attention to protection, should also pay attention to protection when placed in order to ensure that the use of longer time to rotten water tank.